Type J H20 Steel                                                                        Type J-AL H20 Aluminum

• With drainage channel frame.

• For use in exterior applications where the doors will be subjected to vehicular traffic.

• Designed to withstand AASHTO H-20 wheel loading in off-street locations.

Type J, JD Steel Drainage Door

• With drainage channel frame.

• For use in exterior applications where there is concern about water or other liquids entering the access opening.

Type J-AL, JD-AL Aluminum Drainage Door

• With drainage channel frame.

• For use in exterior applications where there is concern about water or other liquids entering the access opening.

• Ideal for most corrosive environments (All hardware is Type 316 stainless steel).

Type Q Steel                                                                        Type K Aluminum

• With angle frame.

• Generally for interior use or exterior applications where water or liquid infiltration is not a concern.

Interior Doors

• Accept a wide variety of flooring materials, allowing the doors to virtually blend in with the surrounding floor.

Type T

• Designed for field-installation of carpet or composition flooring material.

Type TER

• Designed for field installation of architectural flooring material of up to 1" (25mm) in thickness.

Type JFR

• Diamond pattern plate cover and red oxide primer finish.

• Economical fire protection.

• 2 hours fire rating accordance with BS476: Part 22.

• Steel construction.

Type FR 

• Pan-type cover design accepts flooring material for aesthetic fire protection.

• 2 hour fire rating accordance with ASTM E119, NFPA 251, BS476: Part 22 and UL-listed (File R15197).

• Aluminium construction.

• Type FR accepts flooring material up to 1/2" (13mm) in thickness.

• Bilco's UL-Labeled self-closing mechanism is standard on Type FR doors and can be specified on Type JFR doors.

• Provides egress from underground rapid transit system platforms and tunnels in emergency situations.

Type HLC

• Reinforced for extreme loading conditions generated by vehicles such as large aircraft, heavy equipment and fork lift trucks.

• Reinforced for 200 lb/in2 (14kg/cm2)+ 30% impact.

Type PCM

• Incorporates several innovative features which reduce the amount of labor required by precast concrete manufacturers to cast the door into a concrete wall.

• Type J-AL single leaf doors can be supplied with provisions for odor control by specifying Type J-AL-R. Doors are designed to contain odors and reduce the air leakage rate in odor emitting environments.

• Tested under a 1" (25.4mm) column of water, the Type J-AL-R door provides an air infiltration rate of less than 1ft.³/min (.028m³/min) per lineal foot (30.5cm) of cover perimeter.